In this article you will find out how to use R:ED X controller.
DESCRIPTION
RED X Controller is a multifunctional device based on a 32-bit microcontroller. The controller has 27 ports for connecting external devices: 10 digital ports, 10 analog ports, 1 USART, 1 I2C, 1 SPI, 4 ports for controlling DC motors, powered by six 1.2V AAA batteries. Controller’s voltage is from 5V to 12V. Stitched through the USB Type C port. There is a 5-button controller on the front. It is a Lego- and Arduino-compatible controller.
Technical description:
– Size (L*W*H): 87x70x28mm
– Controller power supply: 5-12V
– Output ports: 10 digital, 10 analog, UART, SPI, I2C.
– Voltage switches on power rails from 3.3.V to 5V
– Front panel power indicator
– Power ON/OFF button on front panel
– 5-button controller on the front panel
– Lego compatible body
– Port for controller firmware via USB Type-C port
– 3 controller firmware indicators on the front
– Size (L*W*H): 87x70x28mm
– Controller power supply: 5-12V
– Output ports: 10 digital, 10 analog, UART, SPI, I2C.
– Voltage switches on power rails from 3.3.V to 5V
– Front panel power indicator
– Power ON/OFF button on front panel
– 5-button controller on the front panel
– Lego compatible body
– Port for controller firmware via USB Type-C port
– 3 controller firmware indicators on the front
Controller interfaces
Attention!
The controller is powered by six AAA batteries
(The total voltage must be between 5 and 12V)
(The total voltage must be between 5 and 12V)
© R:ED – Robotics Education. All rights reserved